Get Ready for an Eye-Opening Read – Request your Free PDF Report! Congratulations! Your Free PDF Report is on the way. If it does not arrive within the next minute, please check your spam folders. Skyrocket the Quality of Woodworking Results with the Woodworkers Treasure Chest System
Cutting a straight and square line using a circular saw can’t be too difficult, can it? Or is it? Discover the Eye-Opening Free PDF Report above – Get it securely delivered to your Inbox now! Congratulations! Your Free PDF Report is on the way. If it does not arrive within…
Mill the parts Cut rabbets and dadoes Set up your dado to cut a 3/4-in. wide and 3/8-in. deep groove. Cut a dado 10-in. from the bottom of each side for the bottom step (C). To cut the top rabbets, clamp a sacrificial plywood fence to your saw’s fence, so…
Step 5 – Assemble the bar top Glue up four 1×6 boards (E). Trim the ends of the glue up to a final length of 48 in. with a circular saw and straight edge. Cut a 3/4-in. wide x 3/4-in. deep. groove into the center of the 2×2 boards with…
If you’ve ever used a miter saw to cut long, unsupported stock, you know what a hassle it is to deal with a saw that moves all over the place while you’re trying to make cuts. Yes, you can buy saw stands, but they’re expensive and, frankly, not nearly as…